MD343245 Mitsubishi CABLE SET,SPARK PLUG, Price: 69.75$, Weight: 0.18kg


Make Number Name Availability Weight, kg Ship in, Days Price

Mitsubishi

MD343245

CABLE SET,SPARK PLUG

1

0.18

2-3

69.75$

 

Originals

Make Number Name Availability Weight, kg Processing, days Price  
FUSO
MD343245 
CABLE SET,SPARK PLUG
0
0.207
-
43.33$
Not Available

Substitutions

Make Number Name Availability Weight, kg Processing, days Price  
NGK
5422 
SPARK PLUG
0
0.063
4-5
2.42$
Not Available

Compatibility

FrameMarketModelModel Year FromModel Year ToModificationDiagram
CU#JapanCU2W03.200109.20052000 - TURBO-R LIMITED-EDITION(4WD),S5FA/T View
FrameMarketModelModel Year FromModel Year ToModificationDiagram
CU2-5WGeneral (EXPORT)CU2W11.200112.20082000 - R(MPI-TURBO/4WD),S5FA/T HONGKONG View
FrameMarketModelModel Year FromModel Year ToModificationDiagram
CJ-CP#General (EXPORT)CN9A11.199509.20032000TURBO/4WD(SEDAN)<97M> - EVO-4 GSR,5FM/T View
FrameMarketModelModel Year FromModel Year ToModificationDiagram
CS,CT#General (EXPORT)CT9A09.200008.20132000TURBO/4WD(SEDAN)<01M-> View
FrameMarketModelModel Year FromModel Year ToModificationDiagram
CS,CT#JapanCT9W03.200008.20092000TURBO/4WD(WAGON) - EVOLUTION/EVOLUTION-MR(GT-A),S5FA/T View
FrameMarketModelModel Year FromModel Year ToModificationDiagram
CS,CT#Europe (EUROPE)CT9A12.200003.20112000TURBO/4WD(SEDAN)<01M-> View
FrameMarketModelModel Year FromModel Year ToModificationDiagram
CJ-CP#JapanCP9A08.199508.20002000TURBO/4WD(SEDAN)<98M-> View
FrameMarketModelModel Year FromModel Year ToModificationDiagram
CU2,5WEurope (EUROPE)CU2W02.200312.20082000 View
FrameMarketModelModel Year FromModel Year ToModificationDiagram
N60,70#JapanN73WG09.199708.20022000/4WD View

OEM‑grade Spark Plug Wire Set for Mitsubishi Ignition Systems ⚑

Why this part is needed

Healthy spark plug cables feed stable high voltage from the ignition coil to each plug. Fresh leads restore smooth idle, fast starts, strong acceleration, lower emissions, and better fuel economy. Designed to handle heat, oil mist, and vibration in tight engine bays .

How it works

A suppression core carries 20–40 kV pulses while built‑in EMI control keeps sensors and ECU free from electrical noise. Silicone insulation and heat‑rated boots seal out moisture and prevent arcing. Correct length, ohm rating, and terminal geometry ensure precise spark timing in every cylinder for clean combustion .

What happens if it’s broken

Cracked insulation, swollen boots, or high resistance cause misfires under load, rough idle, hard starts, poor mileage, and a flashing check‑engine light. Arcing can burn coils and foul plugs; raw fuel may overheat the catalytic converter.

Pro tips for fitment

  • Replace the full set every 60–100k km or at first misfire.
  • Route via factory clips; avoid sharp bends and hot manifolds.
  • Push by the boot, not the cable; add dielectric grease.
  • Confirm resistance with a multimeter per lead.

Compatibility

  • Lancer
  • Outlander
  • Airtrek/Outlander
  • Airtrek
  • Rvr
  • Lancer/Mirage
  • Colt/Lancer
  • Lancer/Lancer Classic
  • Lancer
  • Lancer Cedia