• Products
  • 5215512290 Toyota SUPPORT, REAR BUMPER SIDE, RH

5215512290 Toyota SUPPORT, REAR BUMPER SIDE, RH, Price: 13.57$, Weight: 0.034kg

    • Make Number Name Availability Weight, kg Ship in, Days Price

    Toyota

    5215512290

    SUPPORT, REAR BUMPER SIDE, RH

    		 58

    0.034

    2-3

    13.57$
     

    Originals

    Make Number Name Availability Weight, kg Processing, days Price  
    Toyota
    5215512290 
    SUPPORT, REAR BUMPER SIDE, RH
    		7
    0.039
     Dispatch 24h
    16.28$
     
    HABASHI
    5215512290 
    R. BUMPER BRACKET
    		0
    0.039
    4-5
    2.42$
    		 Not Available

    Compatibility

    DescriptionModelOptionsProd PeriodDiagram
    ZZE12#ZZE122R-GEPGKNATM,MTM: AUTOMATIC TRANSMISSION; NO. Of Doors: 4-DOOR; Driver's Position: RIGHT-HAND DRIVE VEHICLES; Body: SEDAN; Grade: GSX TYPE; Engine: (1ZZFE) 1800CC 16-VALVE DOHC EFI; Destination: SOUTH AFRICA08.2004 - 07.2007 View
    DescriptionModelOptionsProd PeriodDiagram
    CDE120,NDE120,ZZE12#ZZE120L-AEMNKWATM,MTM: MANUAL TRANSMISSION; Driver's Position: LEFT-HAND DRIVE VEHICLES; Body: SEDAN; Grade: SOL TYPE; Fuel Induction: HIGH EFFICIENCY TWIN CAM; Gear Shift Type: MTM, 5-SPEED FLOOR SHIFT; Engine: (4ZZFE) 1400CC 16-VALVE DOHC EFI10.2001 - 10.2006 View
    DescriptionModelOptionsProd PeriodDiagram
    CE120,NZE12#,ZZE12#ZZE122R-AEPNKQATM,MTM: AUTOMATIC TRANSMISSION; Driver's Position: RIGHT-HAND DRIVE VEHICLES; Body: SEDAN; Grade: ULTIMA TYPE; Engine: (1ZZFE) 1800CC 16-VALVE DOHC EFI; Destination: AUSTRALIA10.2001 - 02.2007 View
    DescriptionModelOptionsProd PeriodDiagram
    CE121,NZE12#,ZZE12#NZE121-AEPNKATM,MTM: AUTOMATIC TRANSMISSION; Body: SEDAN; Grade: X TYPE; Gear Shift Type: ATM, 4-SPEED FLOOR SHIFT; Engine: (1NZFE) 1500CC 16-VALVE DOHC EFI08.2000 - 09.2006 View

    Right Rear Bumper Side Support Bracket ️

    Engineered to hold the bumper corner exactly where it belongs, this RH side support keeps the rear cover flush with the quarter panel and tail lamp. It locks the shape of the bumper line, prevents sagging, and maintains clean panel gaps for a factory look. Built for precise fit, it uses OE mounting points and clip geometry for a secure, rattle-free install .

    Why you need it

    Daily vibration, curb taps, or minor parking bumps can bend or crack the corner bracket. When that happens, gaps open, the bumper edge droops, and wind noise grows. This support restores alignment, protects the paint at the edge, and keeps the cover from tearing under load.

    How it works

    The bracket bolts to the rear side body panel and provides indexing ribs and clip seats. The bumper skin slides over these guides and locks in. The support shares impact and weight into the body, stabilizing the arc of the bumper corner for long-term durability ️.

    If the part is damaged

    Expect uneven gaps, loose or squeaking corner, rubbing marks, and stressed parking sensor wiring. Water and dirt can enter, clips may pop out, and even a small bump can rip the cover. Replace at once after any corner impact.

    Tech notes

    • Direct-fit, no drilling; uses factory bolt holes
    • Renew broken clips and push pins on install
    • Torque fasteners 7–9 N·m; apply anti-corrosion spray
    • Test-fit bumper to verify even gap before final tightening

    Compatibility

    • Corolla (S.africa)
    • Corolla Sed/Wg
    • Corolla/Altis Sed/Wg
    • Corolla/Fielder